
Financing a lighting renovation after the end of incentives
CEE sheets withdrawn in 2026, RES-EC-104 for outdoor lighting, financial leasing, EPC: the levers still available to finance a renovation.
5 min read
Read the article
Technical and economic benchmarks for professional lighting: what to measure before investing, how to read a datasheet, how to finance a project and how to cope with environments that standard equipment cannot withstand.
30 articles

CEE sheets withdrawn in 2026, RES-EC-104 for outdoor lighting, financial leasing, EPC: the levers still available to finance a renovation.
5 min read
Read the article
Standards and complianceWhat UGR measures, why it depends on the room and the observer, and how to obtain a calculated value that is genuinely usable in a project.
5 min read
Solutions by sectorIlluminance, UGR, screen reflections, face lighting on video calls: the criteria that make for visual comfort in an open-plan office or a meeting room.
5 min read
Audit, renovation and profitabilityLayout, condition of the luminaires, warranties, compliance: the criteria for choosing between relamping and a full lighting renovation.
5 min read
Choosing equipment and design officeAudit, costed scenarios, layout, acceptance measurements: what a lighting design office brings before, during and after the works.
5 min read
Solutions by sectorQuality control, colour coding, retail, food processing: the cases where the colour rendering index stops being a data sheet detail.
4 min read
Photometric study and simulationScale, dark areas, uniformity: learning to read the false colour rendering of a photometric study without being caught out by the palette.
5 min read
Solutions by sectorWorkstations, circulation, quality control: how to zone the lighting of an industrial workshop rather than applying a single level everywhere.
5 min read
Solutions by sectorLumen, candela, lux, candela per square metre: what each photometric quantity measures, which one the eye perceives and which one is regulated.
6 min read
Audit, renovation and profitabilityCEE sheets withdrawn in 2026, RES-EC-104 for outdoor lighting, financial leasing, EPC: the levers still available to finance a renovation.
5 min read
Standards and complianceWhat UGR measures, why it depends on the room and the observer, and how to obtain a calculated value that is genuinely usable in a project.
5 min read
Solutions by sectorIlluminance, UGR, screen reflections, face lighting on video calls: the criteria that make for visual comfort in an open-plan office or a meeting room.
5 min read
Audit, renovation and profitabilityLayout, condition of the luminaires, warranties, compliance: the criteria for choosing between relamping and a full lighting renovation.
5 min read
Choosing equipment and design officeAudit, costed scenarios, layout, acceptance measurements: what a lighting design office brings before, during and after the works.
5 min read
Solutions by sectorQuality control, colour coding, retail, food processing: the cases where the colour rendering index stops being a data sheet detail.
4 min read
Photometric study and simulationScale, dark areas, uniformity: learning to read the false colour rendering of a photometric study without being caught out by the palette.
5 min read
Solutions by sectorWorkstations, circulation, quality control: how to zone the lighting of an industrial workshop rather than applying a single level everywhere.
5 min read
Solutions by sectorLumen, candela, lux, candela per square metre: what each photometric quantity measures, which one the eye perceives and which one is regulated.
6 min read
Audit, renovation and profitabilityLighting renovation cost explained: removal, access equipment, circuit rework and coordination, the items to budget so your LED project holds to the end.
5 min read
Standards and complianceEnforceable minimum values, the employer's obligations, how they fit with the EN 12464-1 standard: the legal framework for workplace lighting.
5 min read
Solutions by sectorManoeuvring yard, loading docks, pedestrian walkways: how to handle the three critical outdoor zones of an industrial site.
5 min read
Audit, renovation and profitabilityHow a lux meter works, where to place the sensor, when to measure and how many points to take: the method for an illuminance reading that stands up.
5 min read
Photometric study and simulationDIALux evo: how a lighting simulation is built, which assumptions create the gap with on-site measurement and how to read a calculation report.
5 min read
Audit, renovation and profitabilityLux meter readings, inventory of the installed base, compliance gaps: what a lighting audit really contains on an industrial or commercial site.
5 min read
Solutions by sectorRoad classification, moving away from like-for-like replacement, night-time dimming: the method for renovating a municipal street lighting installation.
5 min read
Solutions by sectorIlluminance levels, uniformity, vertical illuminance and presence detection: how to handle the lighting of a covered or outdoor car park.
5 min read
Standards and complianceHow to read the EN 12464-1 standard by visual task and find the illuminance in lux, the uniformity and the UGR expected in each workplace.
4 min read
Photometric study and simulationWhat a photometric study contains, the data it requires and the technical decisions it settles before any purchase.
5 min read
Standards and complianceHow to reconstruct and declare lighting consumption on OPERAT when the building has no dedicated sub-metering.
5 min read
Standards and complianceClasses I, II and III of the EN 12193 standard: how to place your sports facility and anticipate the illuminance level in lux to be reached.
5 min read
Solutions by sectorSchool sport, training, competition: how to cover the three uses of a sports hall with a single, correctly sized lighting installation.
5 min read
Audit, renovation and profitabilityInventory of the installed base, lux meter readings, real operating hours: the method for renovating industrial lighting when you do not know what you consume.
7 min read
Audit, renovation and profitabilityThe order of 23 February 2026 abolishes the CEE sheets BAR-EQ-110, BAT-EQ-127 and IND-BA-116. What remains in 2026 and how to finance your renovation.
7 min read
Choosing equipment and design officeATEX zones, -60 to +120 °C, high-pressure washing, salt air: what breaks a luminaire, what IP and IK really guarantee, why to calculate first.
8 min read
Choosing equipment and design officeUGR, CRI, uniformity, maintenance factor, L80, lm/W: what each indicator really measures and the pitfalls to spot on an LED data sheet.
8 min read
Standards and complianceFootball, rugby, tennis, handball, basketball: how the federation level sets the illuminance, the uniformity and the budget of a sports lighting project.
8 min read
Choosing equipment and design officeWarehouse lighting: why measure vertical illuminance on the rack face, choose narrow optics and set detection aisle by aisle.
8 min read
Standards and complianceTertiary decree: lighting is the first item to tackle. Measuring consumption, NF EN 12464-1 levels, controls and financing without a CEE bonus.
8 min read
Audit, renovation and profitabilityPurchase, consumption, maintenance, oversizing: the full cost of LED lighting over ten years, broken down item by item with a real costed case.
8 min read
No resource matches
Try another word, section or year.