
False colour rendering: reading an illuminance map
Scale, dark areas, uniformity: learning to read the false colour rendering of a photometric study without being caught out by the palette.
5 min read
Read the article
DIALux photometric study: what it is for, what it contains and how it prevents badly sized lighting before any purchase.
3 articles

Scale, dark areas, uniformity: learning to read the false colour rendering of a photometric study without being caught out by the palette.
5 min read
Read the article
Photometric study and simulationDIALux evo: how a lighting simulation is built, which assumptions create the gap with on-site measurement and how to read a calculation report.
5 min read
Photometric study and simulationWhat a photometric study contains, the data it requires and the technical decisions it settles before any purchase.
5 min read
Audit, renovation and profitabilityCEE sheets withdrawn in 2026, RES-EC-104 for outdoor lighting, financial leasing, EPC: the levers still available to finance a renovation.
5 min read
Standards and complianceWhat UGR measures, why it depends on the room and the observer, and how to obtain a calculated value that is genuinely usable in a project.
5 min read
Solutions by sectorIlluminance, UGR, screen reflections, face lighting on video calls: the criteria that make for visual comfort in an open-plan office or a meeting room.
5 min read
Audit, renovation and profitabilityLayout, condition of the luminaires, warranties, compliance: the criteria for choosing between relamping and a full lighting renovation.
5 min read
Choosing equipment and design officeAudit, costed scenarios, layout, acceptance measurements: what a lighting design office brings before, during and after the works.
5 min read
Solutions by sectorQuality control, colour coding, retail, food processing: the cases where the colour rendering index stops being a data sheet detail.
4 min read
Photometric study and simulationScale, dark areas, uniformity: learning to read the false colour rendering of a photometric study without being caught out by the palette.
5 min read
Solutions by sectorWorkstations, circulation, quality control: how to zone the lighting of an industrial workshop rather than applying a single level everywhere.
5 min read
Solutions by sectorLumen, candela, lux, candela per square metre: what each photometric quantity measures, which one the eye perceives and which one is regulated.
6 min read
Audit, renovation and profitabilityLighting renovation cost explained: removal, access equipment, circuit rework and coordination, the items to budget so your LED project holds to the end.
5 min read
Standards and complianceEnforceable minimum values, the employer's obligations, how they fit with the EN 12464-1 standard: the legal framework for workplace lighting.
5 min read
Solutions by sectorManoeuvring yard, loading docks, pedestrian walkways: how to handle the three critical outdoor zones of an industrial site.
5 min read
Audit, renovation and profitabilityHow a lux meter works, where to place the sensor, when to measure and how many points to take: the method for an illuminance reading that stands up.
5 min read
Photometric study and simulationDIALux evo: how a lighting simulation is built, which assumptions create the gap with on-site measurement and how to read a calculation report.
5 min read
Audit, renovation and profitabilityLux meter readings, inventory of the installed base, compliance gaps: what a lighting audit really contains on an industrial or commercial site.
5 min read
Solutions by sectorRoad classification, moving away from like-for-like replacement, night-time dimming: the method for renovating a municipal street lighting installation.
5 min read
Solutions by sectorIlluminance levels, uniformity, vertical illuminance and presence detection: how to handle the lighting of a covered or outdoor car park.
5 min read
Standards and complianceHow to read the EN 12464-1 standard by visual task and find the illuminance in lux, the uniformity and the UGR expected in each workplace.
4 min read
Photometric study and simulationWhat a photometric study contains, the data it requires and the technical decisions it settles before any purchase.
5 min read
Standards and complianceHow to reconstruct and declare lighting consumption on OPERAT when the building has no dedicated sub-metering.
5 min read
Standards and complianceClasses I, II and III of the EN 12193 standard: how to place your sports facility and anticipate the illuminance level in lux to be reached.
5 min read
Solutions by sectorSchool sport, training, competition: how to cover the three uses of a sports hall with a single, correctly sized lighting installation.
5 min read
Audit, renovation and profitabilityInventory of the installed base, lux meter readings, real operating hours: the method for renovating industrial lighting when you do not know what you consume.
7 min read
Audit, renovation and profitabilityThe order of 23 February 2026 abolishes the CEE sheets BAR-EQ-110, BAT-EQ-127 and IND-BA-116. What remains in 2026 and how to finance your renovation.
7 min read
Choosing equipment and design officeATEX zones, -60 to +120 °C, high-pressure washing, salt air: what breaks a luminaire, what IP and IK really guarantee, why to calculate first.
8 min read
Choosing equipment and design officeUGR, CRI, uniformity, maintenance factor, L80, lm/W: what each indicator really measures and the pitfalls to spot on an LED data sheet.
8 min read
Standards and complianceFootball, rugby, tennis, handball, basketball: how the federation level sets the illuminance, the uniformity and the budget of a sports lighting project.
8 min read
Choosing equipment and design officeWarehouse lighting: why measure vertical illuminance on the rack face, choose narrow optics and set detection aisle by aisle.
8 min read
Standards and complianceTertiary decree: lighting is the first item to tackle. Measuring consumption, NF EN 12464-1 levels, controls and financing without a CEE bonus.
8 min read
Audit, renovation and profitabilityPurchase, consumption, maintenance, oversizing: the full cost of LED lighting over ten years, broken down item by item with a real costed case.
8 min read
No resource matches
Try another word, section or year.
A photometric study is a digital simulation of how light behaves in a given volume. The room, hall, pitch or road is modelled in three dimensions, with its real dimensions, its obstacles and the reflectance of its surfaces. The luminaires being considered are placed in it with their exact photometry, that is, the measurement file supplied by the manufacturer, in IES or LDT format, which describes how their flux is distributed in every direction.
The software then calculates, point by point on a working plane set at the height relevant to the task, the illuminance achieved, its evenness and the level of glare perceived from the observer positions. The result is not a visual impression: it is a set of figures that can be compared with the requirements of the framework that applies to your activity.