
Lighting design office: what it brings to a project
Audit, costed scenarios, layout, acceptance measurements: what a lighting design office brings before, during and after the works.
5 min read
Read the article
Choosing a professional LED luminaire: reading a datasheet, comparing UGR, CRI and lifetime, coping with ATEX zones, heat and corrosion.

Audit, costed scenarios, layout, acceptance measurements: what a lighting design office brings before, during and after the works.
5 min read
Read the article
Choosing equipment and design officeATEX zones, -60 to +120 °C, high-pressure washing, salt air: what breaks a luminaire, what IP and IK really guarantee, why to calculate first.
8 min read
Choosing equipment and design officeUGR, CRI, uniformity, maintenance factor, L80, lm/W: what each indicator really measures and the pitfalls to spot on an LED data sheet.
8 min read
Choosing equipment and design officeWarehouse lighting: why measure vertical illuminance on the rack face, choose narrow optics and set detection aisle by aisle.
8 min read
Reading a technical data sheet, comparing luminaires, coping with a harsh environment.
The choice of equipment is constrained by zoning, ambient temperature, corrosion or washing. Few references are available and their photometry is often less favourable: calculating first avoids finding out at the end of the works that a level cannot be reached with the certified equipment chosen.
Above eight metres, an error in optics or spacing immediately shows up as dark aisles and over-lit open areas. The constraints of maintenance at height mean aiming for a lifetime and maintenance factor that match how hard access is.